User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1

Arcwave MIB page

Figure 5-7: Arcwave MIB page - Top

The Arcwave MIB page contains information and configurable parameters pertaining to the

operation of the Hub and contained in the Arcwave Enterprise MIB.

Arcwave MIB Maintenance

ARCXtend Id Displays the Hub type, AX1455, AX1455 Standard Band (5.8

GHz), AX1455 Extended Band (5.8 GHz), AX1555 (future),

AX1655 (Enhanced) and AX1755 (future). This parameter is

used internally by ARCSmart to customize the user interface

based on the Hub type.

Cable Interface Control Chose “Enable” to turn-on the RF interface of the ECM and

“Disable” to turn it off. This parameter is useful when the Hub

is used for a non-DOCSIS application, such as the wireless

transport of a digital video or CBR (constant bit rate) voice

signal, and there is no DOCSIS channel on the cable plant.

Selecting the “Disable” setting will prevent the ECM from

continually scanning for a downstream channel, when none

is present. The default setting is “Enable”