User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1

interface.

If the Control via SNMP is chosen, then the Hub can be

managed remotely over the cable network using SNMP.

Enter Title Enter a 40 characters alphanumeric string. The default

setting is the MAC address of the ECM. This parameter can

be used to give a unique identifier for the Hub.

Reset to Factory Defaults Select Apply to return the AR300 MIB settings to the factory

default values listed below.

Element Default Value

============ ====================

Username admin

Password arcwave

Control Mode SNMP

Title <MAC address of BRM-3520>

Cable Interface Control Enable

Automatic Frequency Set Enable

Local Ethernet Interface Control Enable

Network Access Disable

Select Upstream Band High

Upstream Attenuation 99

Downstream Enable False

Upstream Enable False

Select Downstream Power Low

Alarm Mask FFFF

PureBurst ON

TFTP Server IP Address 0.0.0.0

Firmware Upgrade Filename <blank>

Reset ARCXtend Select Apply to reset the AR300 program counter to one.