User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1
Copyright 2005 Arcwave, Inc. 41
Signal Page
Figure 5-4: Signal Page
The Signal Page contains information on the signal status of the upstream and downstream
DOCSIS channels:
Arcwave MIB
Default Downstream Frequency Optionally choose the frequency where the ECM should first
attempt to acquire the downstream RF channel. This setting
will speed up the downstream RF channel acquisition time
by instructing the ECM to go directly to the indicated
frequency where the RF channel is located.
Frequency The frequency of the downstream channel that ECM is
locked on.
QAM Mode The modulation of the downstream channel that ECM is
locked on.
Channel Power The power level that ECM receives at this location.
SNR The signal noise ratio that the ECM receives at this location.