User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1
Copyright 2005 Arcwave, Inc. 30
Figure 4-5: Power Inserter and AC/DC adaptor
CPE Alignment
Note: The higher the received signal level, the less likely the system will be affected by
interference, plant variations, and geography. High received signal strengths are obtained by
proper alignment of the CPE to the Hub.
Connect the signal strength meter
)Connect the port of the DC inserter going to the cable modem to the RX side of the AR100
signal strength meter (depicted in Figure 4-6) or equivalent signal strength meter .
Figure 4-6: AR100 Signal Strength Meter (SSM)
)Align the CPE for maximum signal strength as follows:
To CPE
To Cable Modem
To Power
Pack