User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1
Copyright 2005 Arcwave, Inc. 23
Serial & Ethernet Ports
Material Source Use
ARCXtend Network
Hub
Arcwave
AX1455-SM-25, -60 or -90 and
AX1455-VM-90
Wirless interface to cable network
on plant side
ARCXtend CPE Arcwave
AX1455-VM-12
Wirless interface to cable network
on customer side
ARCXtend CPE Power
Adaptor and DC
Inserter
Arcwave
AX1455-PS-12
Powering CPE
ARCXtend Network
Hub Management Kit,
M/N
Arcwave
AX1455-IFK-232
Hub Interface Cable Kit
10dB and 20dB low
pass attenuators
Arcwave
AX1455-ECF-10
AX1455-ECF-20
Attenuate CPE downstream
output power level
Power Passing Tap Multiple Provides RF signal and power for
network hub
CPE Mounting
Hardware
Valmont, Patriot Antenna
Systems, Wade Antenna Ltd.,
Mounting CPE at the installation
site
RG-6 coaxial cable and
male “F” type
connectors
Multiple Connecting the network hub to the
power passing tap
Connecting the CPE to the cable
modem
Ground device Multiple Grounding the CPE installation
Surge Protector Array Solutions Model 310 Protects the cable modem and
susbcriber equipment from
damage due to a lightning strike.
Table 4-1: Installation Equipment & Materials
Equipment Ordering and Staging
Once you have completed the wireless link planning process you are ready to order or pull from
inventory the necessary equipment. At this point you should verify you have all the equipment
and tools required to complete the installation.