User's Manual

ARCXTEND 5.8 GHZ USER MANUAL – R1.0, ISSUE 1
Copyright 2005 Arcwave, Inc. 7
Weather-proof Ethernet Port: RJ-45 connector for local connection of a PC and for Vdc
powering over Ethernet (PoE).
Pin Function US modern T-568A
1 Ethernet Tx+ green-white
2 Ethernet Tx- green
3 Ethernet Rx+ orange-white
4 PoE - lower voltage (+) blue
5 PoE - lower voltage (+) blue -white
6 Ethernet Rx- orange
7 PoE - higher voltage (-) brown-white
8 PoE - higher voltage (-) brown
Table 2-1: Table for 10/100 Mbits Ethernet wiring and Power over Ethernet
Power-on, LED: Indicates that the Hub is receiving Vac or Vdc power. (AX1455-SM Only)
Hub Configurations
The Hub model number format is AX1UV5-WW-XX where:
• “U” indicates frequency band(s) of operation where “2” is for 5.8 GHz downstream and
5.3 GHz upstream operation and “4” is for 5.8 GHz only.
• “V” is “0”, for Upstream Only, or “5”, for Bidirectional
• “WW” indicates mounting orientation, VM, for Vertical Mount, or SM, for Strand Mount).
• “XX” indicates antenna transmit beam width (i.e. “90”, for 90-Degree horizontal beam
width. “60“, for 60-degree horizontal beam width and “25”, for 20-Degree horizontal
beam width).
All Hubs support both 60 to 90 Vac powering over coax and 24 Vdc powering over Ethernet
(POE). The standard network hub configurations are:
Downstream Range
Model
number
Downstream
Frequency
Band
Upstream
Frequency
Band
Mounting
Orientation
Transmit
Antenna
Beam
width
64
QAM
256 QAM
Bidirectional Systems
AX1455-
SM-60
5813– 5843
MHz
5725 -
5742 MHz
Horizontal 60
Degrees
1 Mile ½ Mile
AX1455-
SM-25
5813– 5843
MHz
5725 -
5742 MHz
Horizontal 20
Degrees
2 Miles ¾ Mile
Upstream Only, No remote monitoring. If remote monitoring is
desired use a standard AX1455-VM-90.
QPSK 16 QAM 64
QAM
AX1405-
SM-60
5725 -
5742 MHz
Horizontal 60
Degrees
8 Miles 4 Miles 2
Miles
Table 2-2: Hub Configurations