User's Manual

Figure 3-14: RFS Celwave Pole Brackets.
3.9 Strand Mount
The majority of Access Points are expected to be mounted on the wire strand that
supports the coaxial cable system.
The strand-mount kit is designed to support a Horizontal-Mount Access Point.
There is an arm at each end of the Horizontal Access Point. The top of the arm is
clamped to the strand, as in Figure 3-15.
The top of the arm is designed to slip in between the strand and the coaxial cable,
which is usually spiral wrapped to the strand.
ARCXtend manual, August 2003 3-19