User's Manual

MT2050 Write Reg 0x0A Data 0x05
MT2050 Write Reg 0x0F Data 0x0F
MT2050 Write Reg 0x10 Data 0x24
AR250DX[01]>
4.5.6 DX Status
This is an engineering and manufacturing/repair command. It should not be used.
4.5.7 DX AGC Control
This is an engineering and manufacturing/repair command. It should not be used.
4.5.8 DX MT Control
This is an engineering and manufacturing/repair command. It should not be used.
4.5.9 DX DAC Output Read Command
This is an engineering and manufacturing/repair command. It should not be used.
4.5.10 DX Read
This is an engineering and manufacturing/repair command. It should not be used.
4.5.11 DX Write
This is an engineering and manufacturing/repair command. It should not be used.
4.5.12 DX Screen Session
The following series of examples contain actual screen captures to show how the
DX Module AX250 responds to various input.
*log0101
AR250DX[01]>h
List of commands...
*LOGxxxx Log into card
Q Quit
I Initialize
W[addr][data] Write EE Memory
R Read EE Memory
PI1xxxxxx PLL I,F,R,N Regs
T[0-2] text Write a Title line
S Status
B Banner
DCExx CATV EIA Input Chan
ARCXtend manual, August 2003 4-17