User's Manual

The response to the DA command is “initializing” followed by a list of registers that

the CPU is writing.

Successful completion is displayed by the actual frequency achieved as “air output”.

Example:

AR250DX[01]>da5789

Initializing...

MT2050 Write Reg 0x01 Data 0xAD

MT2050 Write Reg 0x02 Data 0x1C

MT2050 Write Reg 0x03 Data 0xA8

MT2050 Write Reg 0x04 Data 0x00

MT2050 Write Reg 0x05 Data 0x63

MT2050 Write Reg 0x06 Data 0x10

MT2050 Write Reg 0x08 Data 0x29

MT2050 Write Reg 0x0A Data 0x05

MT2050 Write Reg 0x0F Data 0x0F

MT2050 Write Reg 0x10 Data 0x24

DA Air Output 5789 MHz (250->150 IF 461 MHz LO: 505 MHz)

4.5.5 DX Initialization

The DX INITIALIZE command resets the software and rewrites the registers. The

command is:

The response is the word “initializing” followed by a series of registers being written.

Successful completion is indicated by the prompt:

AR250DX[01]