User's Manual

The command is:
DE<a>, where the alphabetic is Y (yes) or N (no)
DEy
DEn
Example:
AR150TX[02]>dey
DE Downstream RF Enable YES
4.3.9 TX Transmit Defaults
As shipped from the factory, the Transmit Module has the following default values:
DE=no (i.e., disabled)
DA=0000 MHz
T0=…..
T1=…..
T2=…..
4.3.10 TX Status
This is an engineering and manufacturing/repair command. It should not be used.
4.3.11 TX Read
This is an engineering and manufacturing/repair command. It should not be used.
4.3.12 TX Screen Session
The following series of examples contain actual screen captures to show a session
with the Transmit Module might progress. This session includes Engineering/Mfg
commands.
*log0202
AR150TX[02]>b
AR150 Transmitter Copyright (c) 2003 Arcwave, Inc.
Software Build Aug 13 2003 20:46:38
DA Downstream Air Output 5729 MHz
DE Downstream RF Enable NO
........
........
........
AR150TX[02]>da
? Value 1
ARCXtend manual, August 2003 4-6