User's Manual
ARCXTEND USER MANUAL – R1.4, ISSUE 4
Copyright 2005 Arcwave, Inc. 68
arcwaveUpstreamFreq.
arcwaveCableIF arcwaveControl 16 1.3.6.1.4.1.8595.1.12.16 This element turns the
cable interface of the ECM
on or off. When the
interface is turned on, the
ECM will continually look
for a downstream cable
channel.
0 = On
1 = Off
Integer Read/Write Current 0
arcwaveAlarmMask arcwaveControl 17 1.3.6.1.4.1.8595.1.12.17 Sets the alarm mask for
the AR300 module.
All 0’s masks all alarms, all
F’s lets all alarms through,
values in between will
mask the corresponding
alarm.
0000 to
FFFF
SnmpAdm
inString
Read/Write Current FFFF
fwDloadInformation productType 14
arcwaveTFTPserverIP fwDloadInformation 1 1.3.6.1.4.1.8595.1.14.1 This element sets the IP
address of the TFTP
server that will be used for
firmware download.
IP
Address
Read/W rite Current
arcwaveFilename fwDloadInformation 2 1.3.6.1.4.1.8595.1.14.2 This element sets the file
name of the firmware to be
downloaded to the Hub.
255
character
alpha
numeric
string
SnmpAdm
inString
Read/W rite Current 255a
acwaveInitiateFirmWareUpgrade fwDloadInformation 3 1.3.6.1.4.1.8595.1.14.3 This element tells the Hub
to initiate a firmware
upgrade.
1 = true
2 = false
Integer Read/Write Current 2
realtimemonitorInfo productType 15
fwversionNumber realtimemonitorInfo 1 1.3.6.1.4.1.8595.1.15.1 This element contains the
firmware version number
40 character
alpha
numeric
string
SnmpAdm
inString
Read-Only Current 255a
hwversion realtimemonitorInfo 2 1.3.6.1.4.1.8595.1.15.2 This element contains the
hardware version number
40 character
alpha
numeric
string
SnmpAdm
inString
Read-Only Current 255a
dcelock realtimemonitorInfo 3 1.3.6.1.4.1.8595.1.15.3 This element indicates the
state of the Hub
downstream DOCSIS
channel tuner. A”true” will
be displayed if the Hub is
tuned to a channel.
1 = true
2 = false
Integer Read/Write Current 2
dslock realtimemonitorInfo 4 1.3.6.1.4.1.8595.1.15.4 This element indicates the
status of the Hub
Transmitter Module.
A”true” will be displayed if
the module is active.
1 = true
2 = false
Integer Read/Write Current 2