User's Manual

ARCXTEND USER MANUAL – R1.4, ISSUE 4 Copyright 2005 Arcwave, Inc. 67
arcwaveUpstreamEnable arcwaveControl 7 1.3.6.1.4.1.8595.1.12.7 This element turns on the
upstream wireless receiver in the Hub.
1 = true 2 = false
Read/W rite Current 2
arcwaveTitle arcwaveControl 8 1.3.6.1.4.1.8595.1.12.8 This element can be used
to assign a Hub name.
40 character alpha numeric string
SnmpAdm inString
Read/Write Current MAC
address of ECM
arcwaveSetQAMMode arcwaveControl 9 1.3.6.1.4.1.8595.1.12.9 This element selects the
Downstream Power Setting: If “High” is selected, the transmit power is set to 19 dBm. (For use with AX1255-VM-90 and AX1255-SM-90 Hubs only.) If “Medium” is selected, the transmit power is set to 13 dBm. If “Test” is selected, the transmit power is set to 3 dBm.
0 = High 1 = Low 3 = Test
Integer Read/Write Current 1
arcwaveAlarmDestination arcwaveControl 10 1.3.6.1.4.1.8595.1.12.10 Sets the IP address of the
SNMP Traps Monitor. SNMP traps are sent to this address when control mode is set to “HTTP”
IP Address IpAddress Read/Write Current
arcwaveClearalarm arcwaveControl 11 1.3.6.1.4.1.8595.1.12.11 Clears alarms 1 = true
2 = false
Integer Read/Write Current 2
arcwaveRealtimemonitor arcwaveControl 12 1.3.6.1.4.1.8595.1.12.12 Fetches Real Time
Monitoring information from the ArcXtend Hub
1 = true 2 = false
Integer Read/Write Current 2
arcwaveARCXtendId arcwaveControl 13 1.3.6.1.4.1.8595.1.12.13 This element indicates the
ARCXtend Hub type.
01 = AX1255 02 – AX1455
Integer Read Only Current 01
arcwaveBOM arcwaveControl 14 1.3.6.1.4.1.8595.1.12.14 This element turns
PureBurst ingress noise suppression on or off
0 = Off 1 = On
Integer Read/Write Current 1
arcwaveAutoFreqSet arcwaveControl 15 1.3.6.1.4.1.8595.1.12.15 This element enables or
disables the automatic setting of arcwaveEIAInputchannel and
0 = disable 1 = enable
Integer Read/Write Current 1