User's Manual

ARCXTEND USER MANUAL – R1.4, ISSUE 4
Copyright 2005 Arcwave, Inc. 52
receiving a downstream channel and “FALSE” if it is not.
Downstream Lock: Displays the status of the Hub wireless transmitter. It will
display “TRUE” if the Hub is tuned to transmit at the
downstream wireless carrier frequency.
Downstream Transmit Power: Displays the power level of the Hub wireless transmitter into
the antenna.
Upstream Lock: Displays the status of the Hub wireless receiver. It will display
“TRUE” if the Hub is tuned to receive at the upstream wireless
carrier frequency.
Power Supply Voltage: Displays the DC voltage at the ARCSmart AX300 module. It
indirectly reflects the status of the AC adaptor.
Upstream Power Level: Displays the approximate upstream transmit power level. It is
the upstream transmit power level of the ECM minus 10
dBmV.
Transmitter Temperature: Displays the temperature in degrees Celsius at the surface of
the Hub wireless transmitter module.
DS Wireless Carrier
Frequency (MHz)
Upstream Channel Center Frequencies
(MHz)
Default High / Low Setting
5729 and 5735 29.5 through 30.4
This combination is not
allowed and the DS will
automatically be changed
to 5741.
5729 and 5735 30.5 through 42.4 High
5741 13.5 through 26.4 High
5747 13.5 through 26.4 High
5753 13.5 through 26.4 High
5759 5.5 through 10.4 High
5765 5.5 through 10.4 High
5771 5.5 through 18.4 Low
5777 5.5 through 18.4 Low
5783 5.5 through 18.4 Low
5789 21.5 through 34.4 Low
5795 21.5 through 34.4 Low
5801 21.5 through 34.4 Low
5807 37.5 through 43.4 Low
5813 37.5 through 43.4 Low
5819 High
5825 High
5831 High
5837 High
5843 High
5741 through 5843 29.5 through 30.4 Low
5729 through 5843 If not otherwise shown above High
Table 5-2: Default Upstream Band Setting