User's Manual

ARCXTEND USER MANUAL – R1.4, ISSUE 4

Arcwave MIB page

Figure 5-6: Arcwave MIB page

The Arcwave MIB page contains information and configurable parameters pertaining to the

operation of the Hub and contained in the Arcwave Enterprise MIB.

Arcwave MIB Maintenance

ARCXtend Id Displays the Hub type, AX1255 or AX1455. This parameter is

used internally by ARCSmart to customize the user interface

based on the Hub type.

Select Control Mode

Chose the method for managing the Hub.

If Control via HTTP is chosen, then the Hub can be managed

remotely over the cable network or locally via the Hub’s

Ethernet port, using a PC and the HTTP-based user interface.

If the Control via SNMP is chosen, then the Hub can be

managed remotely over the cable network using SNMP.

Cable Interface Control Chose “Enable” to turn-on the RF interface of the ECM and