User's Manual

ARCXTEND USER MANUAL – R1.4, ISSUE 4
Copyright 2005 Arcwave, Inc. 45
The Event Log page contains event information for the ECM and ARCSmart. The Event Log is
presented in reverse chronological order, so the most recent log entry is at the top. Each entry in
the log is time stamped in the format MMDDYYhhmmss in GMT (Greenwich Mean Time). The time
stamp is replaced by asterisks if the cable modem has not yet acquired the time.
The event log is useful when diagnosing sporadic problems, and can reveal the reason for the ECM
having previously gone offline. Not every line in the log represents an error, even if it is flagged as
an error. Log entries of events affecting the data service are flagged Critical, Alert, or Emergency.
DOCSIS standard events are reported for the ECM and following are the valid ARCSmart 2.0
events:
System Event Log
Index The sequence in index of according to the time that event
occurred.
Date/Time The date and time that the event occurred
ID The abbreviation and classification of the event inside the
device. Where;
T01 is equivalent to T1 timeout - Wait for UCD timeout
T02 is equivalent to T2 timeout - Wait for broadcast ranging
timeout
T03 is equivalent to T3 failure or timeout - Wait for ranging
response
T04 is equivalent to T4 failure or timeout - Wait for unicast
ranging opportunity.
T06 is equivalent to T6 failure - Wait for REG-RSP and REG-
ACK
That defined in CM-SP-RFIv2.0-I06-040804
Level The severity level of this event
Text The description of that event