User's Manual

ARCXTEND USER MANUAL – R1.4, ISSUE 4
Copyright 2005 Arcwave, Inc. 44
Upstream Signal
Channel ID The ID of the upstream channel that ECM is either attempting
to, or is, locked on.
Frequency The frequency of that US channel ID
Channel Width The channel width specified for this US channel ID. (Specified
in upstream channel profile inside CMTS)
Channel Power The transmit power of the ECM. The Channel Power
displayed is 10 dB higher than the actual upstream power
level at the F connector on the Hub.
DOCSIS 1.0 Class of Service Parameters
Class ID Indicates the class of service ID.
Max Downstream Rate (bps) The maximum downstream data rate that the ECM is
permitted to use.
Max Upstream Rate (bps) The maximum upstream data rate that the ECM is permitted
to use.
Upstream Channel Priority The preferred upstream channel ID for the ECM to use.
Guaranteed Min Upstream Data
(bps)
The minimum upstream data rate that is reserved for the ECM
to use.
Privacy Enable Enables the encryption of the frames transmitted using RF
signal over coaxial cable between CMTS and the ECM.
Event Log Page
Figure 5-5: System Event Log page