User's Manual

ARCXTEND USER MANUAL – R1.4, ISSUE 4
Copyright 2005 Arcwave, Inc. 7
2 Ethernet Tx- green
3 Ethernet Rx+ orange-white
4 PoE - lower voltage (-) blue
5 PoE - lower voltage (-) blue -white
6 Ethernet Rx- orange
7 PoE - higher voltage (+) brown-white
8 PoE - higher voltage (+) brown
Table 2-1: Table for 10/100 Mbits Ethernet wiring and Power over Ethernet
Power-on, LED: Indicates that the Hub is receiving VAC or VDC power. (AX1255-SM Only)
Hub Configurations
The Hub model number format is AX1UV5-WW-XX where:
• “U” indicates frequency band(s) of operation where “2” is for 5.8 GHz downstream and 5.3
GHz upstream operation and “4” is for 5.8 GHz only.
• “V” is “0”, for Upstream Only, or “5”, for Bidirectional
• “WW” indicates mounting orientation, VM, for Vertical Mount, or SM, for Strand Mount).
• “XX” indicates antenna transmit beamwidth (“90”, for 90-Degree Horizontal Beamwidth and
“25”, for 20-Degree Horizontal Beamwidth).
All Hubs support both 60 to 90 VAC powering over coax and 24 VDC powering over Ethernet
(POE).
The standard network hub configurations are:
Downstream
Range
Model
number
Downstream
Frequency
Band
Upstream
Frequency
Band
Mounting
Orientation
Transmit
Antenna
Beamwidth
64
QAM
256
QAM
Bidirectional Systems
AX1255-
SM-90
5725 MHz –
5850 MHz
5250 MHz
- 5350
MHz
Horizontal 90 Degrees 1 Mile ¼ Mile
AX1255-
SM-25
5725 MHz –
5850 MHz
5250 MHz
- 5350
MHz
Horizontal 20 Degrees 2 Miles 1 Mile
AX1255-
VM-90
5725 MHz –
5850 MHz
5250 MHz
- 5350
MHz
Vertical 90 Degrees 2 Miles ½ Mile
Upstream Only, No remote monitoring. If remote monitoring is desired
use a standard AX1255-VM-90.
QPSK 16
QAM
64 QAM
AX1205-
VM-90
5725 MHz –
5850 MHz
5250 MHz
- 5350
MHz
Vertical
90 Degrees
8 Miles 4 Miles 2 Miles
Table 2-2: Hub Configurations