User's Manual

Be sure the “003 Router” and “006 DNS Server” options are set correctly with the
Internet router’s IP address. In this example both Router and DNS server options are set to
10.10.10.203.
3.5.2 Network Testing for Vyyo system
The easiest way to test whether your NMS Server’s DHCP server options are configured
correctly is to connect a computer (MAC, PC, or Laptop) to the Ethernet switch.
Be sure that the user’s PC is set to obtain its networking settings using DHCP. This is done by
going to Start Menu -> Settings -> Control Panel ->, Network Connection -> Local Area
Connection. Click on “Internet Protocol (TCP/IP)” and then “Properties” in order to verify that
DHCP is enabled.
June 2003 Page 3-12