User's Manual

1. Highlight “Server Options” and Click “Action” > “Configure Options”.
2. In the “General Tab”, check the following and enter the specified value
a. 002 Time Offset – Input: 0
b. 003 Router – Input: Enter router’s IP address or NMS’ IP address (Require by Vyyo
Modem)
c. 004 Time Server – Input: NMS’ IP address (e.g. 10.10.10.201)
d. 006 DNS Server –Enter the IP address of the DNS server (e.g. router or NMS)
e. 007 Log Server – Input: NMS’ IP address (e.g. 10.10.10.201)
f. 066 Boot Server Host Name - Input: NMS’ IP Address (e.g. 10.10.10.201)
g. 067 Bootfile Name - Input: configuration file the modem loads (e.g. mic1.cfg)
3. When finished Click “Apply” then “OK”. Your window should now look similar to this:
June 2003 Page 3-11