User's Manual

To ARCell ODU (AR3155)
Grounding device
Ground wire (green or bare)
To cable modem
Figure 2-4: Typical grounding device at subscriber premises.
2.3 DC Power Supply
The Transceiver is powered over the coaxial cable via a Power Inserter (Figure 2-5) provided with
the Transceiver.
Inside the building, route the RG-6 from the building entrance point to the wireless cable modem
location. Install an F connector on the cable. Connect the transceiver cable to the “To Antenna” F-
type female connector of the Power Inserter.
June 2003 Page 2-7