User's Manual

11 Time-of-Day Server Setup Guide
The purpose of this Section is to review installing the TimeSync (RFC 868
16
) server for
Arcwave systems. TimeSync will install on any Windows 2000/NT operating system and
provide the time-of-day server required by DOCSIS.
11.1 Install TimeSync
1. Go to ARCELL / Servers directory, then to Timesync
2. Locate and run Install
11.2 Configure TimeSync
3. Execute which can be found in the Windows Control Panel.
4. Once running click on the Server tab and check Time (RFC868)
5. Click OK to finish
16
RFCs are “standards” set by the Internet Engineering Task Force (IETF) and are available at
http://www.ietf.org/rfc.
June 2003 Page 11-1