User's Manual
Table Of Contents
- Hub Installation Checklist – 6x60-degree
- Link Budget Parameters for 6x60 Hub
- Wireless Cable Modem Configuration – CXC150W
- W-CMTS BSR1000W Setup Guide
- Factory Settings BSR1000W
- Connecting to the BSR1000 CMTS
- Setting the System Passwords
- Configure the Ethernet IP Address
- Configure Cable IP Address
- Configure the CMTS
- Configure Downstream Port
- Configure Upstream Ports:
- Configure Basic Routing
- Save the Configuration
- Creating a static route from the server to the BSR1000
- Windows 2000 DHCP Server
- Time-of-Day Server Setup Guide
- BSR1000W SNMPc View and Community
- SolarWinds’ TFTP-Server
- Cable System Basics
- Reader Feedback
6. Click OK when finished
7. Check for proper operation by stopping the service, the restarting it. This can be done
by right-clicking on .
If properly configured the TFTP-Server window will come up.
13.3 Configure the TFTP Server
8. Open the TFTP Server Configuration by going to File → Configure
9. Select the TFTP Root Directory. This is the directory that contains the CM files the
modem will download. (Various ARCWAVE standards: \ARCi\MIC, \ARCELL\cmfiles)
June 2003 Page 13-2