User's Manual
Table Of Contents
- Hub Installation Checklist – 6x60-degree
- Link Budget Parameters for 6x60 Hub
- Wireless Cable Modem Configuration – CXC150W
- W-CMTS BSR1000W Setup Guide
- Factory Settings BSR1000W
- Connecting to the BSR1000 CMTS
- Setting the System Passwords
- Configure the Ethernet IP Address
- Configure Cable IP Address
- Configure the CMTS
- Configure Downstream Port
- Configure Upstream Ports:
- Configure Basic Routing
- Save the Configuration
- Creating a static route from the server to the BSR1000
- Windows 2000 DHCP Server
- Time-of-Day Server Setup Guide
- BSR1000W SNMPc View and Community
- SolarWinds’ TFTP-Server
- Cable System Basics
- Reader Feedback
13 SolarWinds’ TFTP-Server
The SolarWinds’ TFTP Server allows initializing modems to download a cable
modem file (cm file) to complete its registration process. This particular TFTP-Server will
run on any Windows 2000/NT/XP operating system. All files/folders referred to in this
document can be found either on the CD-ROM provided by ARCWAVE or in C:\ARCELL\
13.1 Installing the server
1. Execute Install located in Servers \ TFTP
1.1. Accept Registry changes. Applying these changes will allow the TFTP server to run
as a Windows Service.
13.2 Configure the Window’s Service
2. Open Windows Services which can be found in Administration Tools in the Windows
Control Panel.
3. Double click on
to bring up the properties window.
4. Verify that the “Startup type” is set to Automatic
5. Go to the Log On tab and enable the service to interact with the desktop.
June 2003 Page 13-1