User's Manual
Table Of Contents
- Hub Installation Checklist – 6x60-degree
- Link Budget Parameters for 6x60 Hub
- Wireless Cable Modem Configuration – CXC150W
- W-CMTS BSR1000W Setup Guide
- Factory Settings BSR1000W
- Connecting to the BSR1000 CMTS
- Setting the System Passwords
- Configure the Ethernet IP Address
- Configure Cable IP Address
- Configure the CMTS
- Configure Downstream Port
- Configure Upstream Ports:
- Configure Basic Routing
- Save the Configuration
- Creating a static route from the server to the BSR1000
- Windows 2000 DHCP Server
- Time-of-Day Server Setup Guide
- BSR1000W SNMPc View and Community
- SolarWinds’ TFTP-Server
- Cable System Basics
- Reader Feedback
10.4 Restricting Addresses
It’s best to restrict a pool of addresses just for modems. In the “Address Pool” click to
add a restriction. Any unrestricted addresses will be used for other clients (e.g. computers,
routers) on the network. This only needs to be set once.
10.5 Viewing Leases
If you wish to view the IP Addresses that have been leased, click on “Address Leases”
under the Scope.
June 2003 Page 10-7