User's Manual
Table Of Contents
- Hub Installation Checklist – 6x60-degree
- Link Budget Parameters for 6x60 Hub
- Wireless Cable Modem Configuration – CXC150W
- W-CMTS BSR1000W Setup Guide
- Factory Settings BSR1000W
- Connecting to the BSR1000 CMTS
- Setting the System Passwords
- Configure the Ethernet IP Address
- Configure Cable IP Address
- Configure the CMTS
- Configure Downstream Port
- Configure Upstream Ports:
- Configure Basic Routing
- Save the Configuration
- Creating a static route from the server to the BSR1000
- Windows 2000 DHCP Server
- Time-of-Day Server Setup Guide
- BSR1000W SNMPc View and Community
- SolarWinds’ TFTP-Server
- Cable System Basics
- Reader Feedback
8.1.5 Specify the Maximum Number of CPEs behind the modem
(required).
The maximum number of network devices (e.g. computers) that the modem will allow must
be specified.
Click on the MAX CPE button and enter the upstream ID that you want the modem to be on.
Click Save.
8.1.6 Class of Service and Baseline Privacy (optional)
Click on the Class of Service button and the required parameters (all of them)
click Save.
Recommended Parameter Values
• Class ID = 1
• Max Downstream = Not available at this time
• Max Upstream = Not available at this time
• US Channel Priority = 0
• Guar Min US Channel = 0
• Maximum US Burst
• CoS Privacy Enable = 1
Click on the Baseline Privacy button and the required parameters (all of them)
June 2003 Page 8-3