ARC-19509 Nine Channels Duplex Video Multiplexer User’s Manual
ARC-19509 CONTENTS 2003/09/01 V1.0 040055A 1. Introduction ------------------------------------------------------------------- 2 2. Specification --------------------------------------------------------------------- 2 3. Installation ------------------------------------------------------------------------ 3 4. Function Key Description ------------------------------------------------------- 4 5. Operation Mode ----------------------------------------------------------------- 5 6.
ARC-19509 1. Introduction The nine channels multiplexer has the following features: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 2. Nine channels video input with loop-out and dynamic terminal resister settings. Provides three video output ports(monitor out, call out and REC out). Automatically detect NTSC/PAL video system. Video input signals with AGC (Auto Gain Control) function. Adopt E.A.L. (Erase Asynchronous Line) technique.
ARC-19509 3. Installation ALARM ALARM Back Panel 3.1 Power Supply DC 12V ±10%, 830mA, DC 12V/1A switching mode power adapter is recommended. 3.2 ALARM I/O There is a DB15 connector on the left side of the back panel, which is connected to the external alarm sensor and time lapse VCR trigger input. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 GND ALARM IN-1 ALARM IN-2 ALARM IN-3 ALARM IN-4 ALARM IN-5 ALARM IN-6 ALARM IN-7 GND REC TRIG RELAY OUT-COM RELAY OUT-N.C. RELAY OUT-N.O.
ARC-19509 4. Function Key Description Front Panel From the left front panel button key 4.1 Camera selection keys, camera No.1-9 Press this key to select full-view of the desired camera channel, when under normal or playback mode condition. Function Key 4.2 Press MULTI-WIN key to display the Multi-Window image ( Multi-Window supports 4,6 and 9 image split), when under normal or playback mode condition. 4.3 Press SEQ key to enter auto sequence mode, when under normal mode condition. 4.
ARC-19509 5. Operation Mode There are four operational modes on the multiplexer. Mode Normal Description The multiplexer automatically enters into normal mode, when the power has been put on. Press camera selection key to view the full-image. Press key to view multi-window images. Multi-window supports 4,6 and 9 image split. This mode supports freeze function under multi-window and full-image. Multi-windows freeze: 1.
ARC-19509 6. Recording and Playback The multiplexer is full duplex. The “full duplex” means to record multiple cameras and playback synchronously. 6.1 RECORD The multiplexer can support general VCR or time-lapse VCR recorder. (a) TO RECORD USING EXTERNALTRIGGER SIGNAL FROM TIME-LAPSE VCR： The time-lapse VCR recorder generates a trigger signal from “VCR trigger” to signal multiplexers when it is the time to switch channels. We recommend using this feature when user’s VCR recorder supports this feature.
ARC-19509 7. Alarm Function 7.1 ALARM TYPES There are three kinds of alarm events： (a) Power-on time and date sequence. (b) Video signal loss. (c) Motion has been detected. (d) Trigger by external alarm input. 7.2 RESPONSE TYPES OF ALARM There are four types of responses： (a) Buzzer turns on. (b) Relay turns on. (c) Priority recording when triggered by external alarm input. (d) Alarm list. 7.
ARC-19509 8. Menu Set Up 8.0 THE STRUCTURE OF MENU MAIN MENU ▊ ----------------------------▊TIMER/OSD SET UP ▊AUTO CHANNEL SEQUENCE ▊CALL CHANNEL SEQUENCE ▊CAMERA SET UP ▊VCR SET UP ▊ALARM PROCESSOR ▊TERMINAL RES CONFIG BEEP WHEN KEY PUSHED:NO VIDEO SYSTEM:AUTO COLOR BAR ▊LOAD FACTORY DEFAULT Figure 8-1 The main menu is shown in Figure 8-1. Use the main menu as an example, to introduce the structure of menus. (a) The title of menu： Located on the top left side of the first line “MAIN MENU”.
ARC-19509 8.1 TIMER/OSD SET UP TIMER/OSD SET UP ▊▊ ----------------------------DATE DISPLAY:ON DATE FORMAT:YY/MM/DD DATE 01/01/01 TIME DISPLAY:ON TIME 00:00:01 TIMER POSITION:BOTTOM TEXT COLOR:COLOR 1 Figure 8-2 In the main menu use <↑> or <↓> key to select “TIMER/OSD SET UP”, and press to enter the menu of Figure 8-2. 8.1.1 DATE DISPLAY Set “ON” to display the date and “OFF” to turn off the date display. 8.1.
ARC-19509 8.2 AUTO CHANNEL SEQUENCE In the main menu select “AUTO CHANNEL SEQUENCE” and press to enter the menu of Figure 8-3. AUTO CHANNEL SEQUENCE ▊▊ ----------------------------1111 SEQUENCE: 1234567890123 CAMERA NO: Q123456789--DWELL TIME:3333333333333 Figure 8-3 8.2.1 SEQUENCE In the auto sequence mode the order of the switches are in these following sequence #1, 2…and 13 and switch back to #1. 8.2.2 CAMERA NO Press to enter the edit procedure.
ARC-19509 8.4 CAMERA SET UP In the main menu select “CAMERA SET UP”, and press to enter the menu of Figure 8-4. CAMERA SET UP ▊▊ ----------------------------▊CAMERA TITLE ▊CAMERA TITLE DISPLAY ▊CAMERA 1,2,3 SET UP ▊CAMERA 4,5,6 SET UP ▊CAMERA 7,8,9 SET UP CAMERA TITLE ▊▊▊ ----------------------------CAMERA 1:---CH1---CAMERA 2:---CH2---CAMERA 3:---CH3---CAMERA 4:---CH4---CAMERA 5:---CH5---CAMERA 6:---CH6---CAMERA 7:---CH7---CAMERA 8:---CH8---CAMERA 9:---CH9---Figure 8- 4 Figure 8-5 8.4.
ARC-19509 8.5 VCR SET UP On the main menu select ”VCR SET UP”, and press to enter the menu of Figure 8-8. VCR SET UP ▊▊ ----------------------------RECORDING TIME:24RH RECORDING TYPE:FRAME Figure 8-8 8.5.1 RECORDING TIME The multiplexer supports synchronous and asynchronous mode for VCR. Synchronous mode: To operate this mode, the recording time must be set to “SYNC” and the signals to “TRIGGER OUT” and “GND”, the VCR must be connected to the multiplexer.
ARC-19509 Figure 8-9 Figure 8-10 8.6.1 ALARM 1,2,3 CONFIGURE On the menu of Figure 8-9 select “ALARM 1,2,3 CONFIGURE”, and press to enter the menu of Figure 8-10. 8.6.1.1 SENSOR ENABLE Set on “YES” to enable the sensor detection. Set on “NO” to ignore the sensor. 8.6.1.2 SENSOR TYPE Set on “N.C.” for normal-close sensor, “N.O.” for normal-open sensor. 8.6.1.3 BUZZER ENABLE Set on “YES” to turn the internal buzzer on when a valid alarm occurs. Set on “NO” to keep the buzzer to mute. 8.6.1.
ARC-19509 8.6.3 MOTION SET UP On the menu of Figure 8-9, select “MOTION SET UP”, press key to enter next menu on Figure 8-12 8.6.3.1 ALL MOTION ENABLE Set “NO’ to disable all-channel motion detection. Set “YES” allow user to enable motion detection for individual channel. 8.6.3.2 CHANNEL MOTION SET UP On the menu of Figure 8-12, select one channel you want to do motion set up, press key to enter next menu on Figure 8-13. 8.6.3.2.
ARC-19509 8.6.7 ANY KEY TO STOP User can press any key to stop the alarm output when alarm output accrues, while set to “YES”. Setting “NO” will make the alarm output to be kept over the alarm duration and can’t stop by user. 8.6.8 SHOW ALARM LIST At the menu of Figure 8-9, select “SHOW ALARM LIST”, and press key to show the alarm list. The alarm list is shown as Figure 8-14. a. The first and the second fields denote alarm event: ALARM LIST P01 CH1 A: The first channel alarm input triggered.
ARC-19509 8.10 COLOR BAR Display color bar in order to adjust the monitor. 8.11 LOAD FACTORY DEFAULT On the main menu, select “LOAD FACTORY DEFAULT”, and press to enter the menu of Figure 8-16 to setting. LOAD FACTORY DEFAULT ▊▊ ----------------------------LOAD DEFAULT SETTING AND CLEAR ALARM LIST LOAD DEFAULT SETTING Figure 8-16 8.11.1 LOAD DEFAULT SETTING AND CLEAR ALARM LIST Load the parameters of factory default and erase alarm list. 8.11.
