User's Manual

1. Turn on S111 BT by short press the power button
2. The S111 BT automatically enters pairing mode
shown by the red and blue LED flash alternately.
3. Turn on Bluetooth on your phone and pair it with the
speaker.
.
Getting Connected
The S111 BT allows you to pair with your mobile device in two different ways:
Notes:
? Pairing mode will last up to five minutes or until a device
is found, the speaker will automatically turn off without
successful pairing within this period.
? If you exceed the effective range of approx. 10M (33ft)
the speaker will disconnect and will automatically
reconnect if the speaker re-enters the effective range
within five minutes.
A. Bluetooth Pairing
Click Settings
ON
Click Search
for Devices
ON
Bluetooth is On
OFF
Switch On
Bluetooth
Example: iOS
Press Settings > Bluetooth and switch Bluetooth on > S111BT > Pair
Click Settings
Select Bluetooth
Switch On
Bluetooth
Bluetooth
is On
Now Connected
Select S111 BT
Example: Android 4.0
Press Menu > Settings > Switch on Bluetooth > Bluetooth > Search for devices > S111BT > Pair
ON
Select S111 BT
ON
Now Connected
Blue
? Blue light flashing means the speaker device is on.
? Blue light on constantly means speaker is paired to
a device / fully charged.
Red
? Red light on constantly means the battery is at
around 50% / charging.
Red & Blue
? When both the red and the blue lights are flashing,
it means the speaker is in pairing mode.
? When both the red and the blue lights are flashing
every one second, means the battery is at around
25%
LED Light Signals
Reconnection
Via Bluetooth
1. Turn on Bluetooth on phone.
2. Turn on S111 BT by short press the power button .
3. If your device was the latest one to be paired with
the S111 BT it will connect automatically otherwise
please repeat pairing section.
Power on:
Short press the power button
Volume up:
One short press of the VOL +.
Volume down:
One short press of the VOL -.
Next track:
While music is playing press and hold the VOL +
until the track moves to the next track.
Previous track:
While the music is playing, press and hold the VOL -
until the start of the track. replays. Quickly press and
hold the VOL - again to go to the previous track.
Pause / Play:
One short press and release of the power button .
Power off:
Press the power button for 5 seconds.
.
Music Operations
B. Connect via Cable
1. Turn on S111 BT by short press the power button .
2. Insert one end of the 3.5mm audio cable into the speaker and the other end into your mobile device
headphone's output.
3. Enjoy your music !