User Manual

25 26
PROBLEM POSSIBLE CAUSES SOLUTIONS
The appliance
does not come on
• There is no current
• It is not plugged in
• The internal safety
device has tripped
• Check the power supply
• Plug the unit into a power outlet
• Wait 30 minutes. If the problem
persists, contact customer service
The appliance works
for a short time only
• There are bends in the air
exhaust hose
• Something is preventing the
air from being discharged
• Position the air exhaust hose
correctly, keeping it as short
as possible and free of curves
to avoid bottlenecks
• Check and remove any obstacles
obstructing air discharge
The appliance works but
does not cool the room
• Windows, doors, and/or
curtains open
• Close doors, windows, and curtains
bearing in mind the "tips for correct
use" given above
• There are heat sources
in the room (oven,
hairdryer, etc)
• Eliminate the heat sources
• The air exhaust hose
is detached from the
appliance
• Fit the air exhaust hose in the
housing at the back of the appliance
• The technical specification
of the appliance is not
adequate for the room in
which it is located
• Consider replacing the unit with a
higher BTU capacity.
During operation,
there is an unpleasant
smell in the room
• Air filter clogged • Clean the filter as described above
PROBLEM POSSIBLE CAUSES SOLUTIONS
The appliance does not
operate for about three
minutes after restarting it
• The internal compressor
safety device prevents
the appliance from being
restarted until three minutes
have elapsed since it was
last turned off
• Wait. This delay is part of normal
operation
The following message
appears on the display:
• The appliance has a
self-diagnosing system to
identify unit malfunctions
• See the SELF-DIAGNOSIS section
above