Installation Guide

9
OPERATING INSTRUCTIONS
CONTINUE button _______________________
• Press to activate the continuous
dehumidifying operation.
• If the CONT. mode is selected the unit will
continue to dehumidify and will not be
controlled to a specic humidity setting.
• The humidity setting cannot be adjusted.
• To adjust the humidity sitting, press the
CONT. button to cancel the continuous
mode.
TURBO button __________________________
• The Turbo button is to toggle between
normal fan speed and the highest fan speed
(Turbo).
• Press to select either High or Normal fan
speed.
• Set the unit to turbo by pressing the TURBO
button (green light illuminated) for maximum
moisture removal.
• When the desired humidity level has been
reached, press the TURBO button once
more (green line will extinguish) to return to
normal operation.
TIMER button __________________________
• Timer button is used in conjunction with
the (Humidity Control) buttons
to initiate the Auto start and Auto stop
feature.
Setting the Timer _______________________
• The TIMER button can be used to set a
desired ON or OFF time for the dehumidier.
The ON time or OFF time setting can only
be set in increments of 0.5 hr. up to 10 hrs.
and 1hr increments from 10 to 24 hrs.
• Press the TIMER button, the timer O or On
indicator light illuminates. This indicates the
auto stop/start program is initiated.
• Press or hold the or button to change
the desired stop/start time by 0.5 hour
increments, up to 10 hours, then at 1 hour
increments from 10 to 24 hours from the
time the feature is set. The control will
count down the time remaining until the
dehumidier stops/starts.
• Press the TIMER button again the timer On
indicator light illuminates. This indicates the
auto start program is initiated.
• Press or hold the or button to
change the desired start time by 0.5hour
increments, up to 10 hours, then at 1 hour
increments from 10 to 24 hours from the
time the feature is set. The control will count
down the time remaining until starts.
• When the Timer On & Timer O times are
set, within the same program sequence,
both On and O indicator lights will
illuminate indicating both On and O times
are programmed.
• Turning the unit On or O at any time or
adjusting the timer setting to 0.0 will cancel
the Auto Start / Stop function.
• If the water bucket is full and the LED
display window displays P2, the Auto
Start /Stop function will also be canceled.
Note:
• If the unit is off, the timer “On” indicator
be the first to illuminate.
• If the dehumidifier is on, the timer
“Off” indicator will first illuminate.
• Toggle between Timer On and Timer Off
by pressing the TIMER button.