Specifications

17
Filter Cycle Time-out:
During a Filter cycle, if an accessory (a pump, the blower, or the light) is used manually, the
Filter cycle is suspended the time the accessories are used. Once all accessories are turned off
(whether manually or by built-in timer), the Filtration cycle will begin at its next
expected time.
Panel Lockout:
It is possible to lock out all the keys. This feature is helpful when young children could have
access to the keypad. To lock/unlock the keypad, simply press on the Pump #1 key for at
least 5 seconds.
There are 2 modes you can choose from, full lock, or the partial lock. Full lock means ALL
keypad functions are locked. Partial lock means only the basic functions of the spa remain
usable. (pumps, blower and light)
Locking Your Digital Control Pad:
Press and hold the Pump 1 key for 5 seconds. At that point the display will show, “LocP”
with the “P” representing Partial Lock. Keep key pressed for 5 more seconds, if you want to
be in Full Lock mode. The “LocF” message will be displayed.
When the Control is locked, all automatic functions of the system run as usual. However,
when a locked key is pressed, a “LocP” or “LocF” message will then be displayed for 1
second. To unlock the keypad, simply press and hold Pump 1 key again for 5 seconds.
Inverting The Display
Press the TA (Pump 3 button on Epic) for 20 seconds to invert the display.
Turning Waterfall ON/OFF (Peak II Models only)
To turn the waterfall on/off manually, press and hold the Therapy Air Key (or Pump 3 on an
Epic Model) for 5 seconds.
Temperature displayed in Fahrenheit or Celsius:
The temperature can be displayed in Fahrenheit or Celsius. Press and hold Light key for five
seconds, to toggle between ºF and ºC. Note that after a power-up the system always returns
to default Fahrenheit display.
Boost Filtration mode:
Press and hold the Pump 2 key for 5 seconds to enable the Boost Filtration mode, Pump 1
high speed and the ozonator will fun for 45 minutes. When enabled, the “BOO” message is
displayed. This mode is used to speed-up filtration after intensive use of the spas or to help
mix chemical just added in the spa.