Safety data sheet

41.0
Page 4/8
Safety Data Sheet (SDS)
OSHA HazCom Standard 29 CFR 1910.1200(g) and GHS Rev 03.
Issue date 06/04/2015
Reviewed on 05/25/2015
Trade name: Arctic Silver Thermal Adhesive
· Control parameters
· Components with occupational exposure limits:
The product does not contain any relevant quantities of materials with critical values that have to be monitored
at the workplace.
· Additional information: The lists that were valid during the creation of this SDS were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing and wash before reuse.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
· Breathing equipment: Not required.
· Protection of hands:
Protective gloves
· Eye protection:
Tightly sealed goggles
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Viscous
Color: Silver
· Odor: A: Slight epoxy odor
B: Mercaptan sulfur odor
· Odor threshold: Not determined.
· pH-value: Not determined.
· Change in condition
Melting point/Melting range: Not determined.
Boiling point/Boiling range: > 999 °C (> 1830 °F)
· Flash point: > 204 °C (> 399 °F)
· Flammability (solid, gaseous): Not applicable.
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto igniting: Product is not self-igniting.
· Danger of explosion: Product does not present an explosion hazard.
· Explosion limits:
Lower: Not determined.
(Contd. on page 5)
9 Physical and chemical properties