Safety data sheet

EG-Sicherheitsdatenblatt
Gem. 91/155/EG; 2001/58/EG
innovatek OS GmbH
Stand: 12. Jan. 2010 www.innovatek.de
800528Arctic Silver 5 WLP 3,5g [e-mail]
2
for proper disposal. Do not flush to sewer. Prevent material from entering storm sewers, ditches that lead to
waterways and ground.
Small Spills: Absorb spill with absorbent material, then place in a sealed metal container for proper disposal.
SECTION 7: HANDLING AND STORAGE
Overheating may cause container to rupture. Use explosion proof electrical equipment. Containers must be kept
closed and ventilation provided to prevent vapor
concentration build-up. Store in a cool dry place. Do not breathe vapor or get liquid in eyes, or on skin and
clothing. Keep away from heat or sources of ignition.
Check all containers for leaks. Wear protective clothing as in section above. Avoid prolonged breathing of
vapors or contact with skin. Ensure that all equipment is
grounded to prevent static discharge. Containers of this material may be hazardous when emptied due to solid
or vapor residue. All hazard precautions given in this
data sheet must be observed for empty containers.
KEEP OUT OF REACH OF CHILDREN.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines:
CHEMICAL NAME ACGIH TLV OSHA PEL ACGIH STEL
Silver 0.1 mg/m3 0.01mg/m3 NA
Boron Nitride 10 mg/m3 10 mg/m3 NA
Zinc Oxide 10 mg/m3 (dust) 15 mg/m3 (dust) 10 mg/m3
Aluminum Oxide 10 mg/m3 (dust) 10 mg/m3 (dust) NA
Polyol Ester NA NA NA
NFPA and HMIS Codes: NFPA HMIS
Health 1 1
Flammability 1 1
Reactivity 0 0
Personal Protection - B
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Grey Grease Solubility in Water: <1.0%
Odor: None Specific Gravity: 4.05-4.15
pH: NA Evaporation Rate: Slower
Vapor Pressure: NA (Butyl acetate=1)
(Air 1) Boiling Range: NA
Vapor Density: NA (Water =1)
Arctic Silver Incorporated MSDS # AS5_3
Page 2 of 2
(Air = 1) Percent Volatile: < 0.2%
SECTION 10: STABILITY AND REACTIVITY INFORMATION
Stability: This product is stable.
Conditions to Avoid: Contamination with incompatible materials.
Incompatibility: Avoid strong oxidizing agents, strong acids and alkalis.
Products of Decomposition: Carbon monoxide, carbon dioxide, silicon dioxide, oxides of nitrogen, and
incompletely burned hydrocarbons which may include minute
traces of formaldehyde. Reacts with acids and alkalis to form combustible hydrogen gas.
Hazardous Polymerization: May not occur.
Conditions to avoid: NA