Use and Care Manual

8
Operation
CONTINUE button
Press to activate the continuous dehumidifying
operation.
Operation
On
Off
Auto defrostFull
Power button
Bucket full light
Timer on light
Timer off light
Auto defrost light
Press to turn the dehumidifier on and off.
Down/Up buttons
Indicator lights
Humidity Set Control Buttons
Timer Set Control Buttons
The humidity level can be set within a range
of 35%RH(Relative Humidity) to 85%RH
(Relative Humidity) in 5% increments.
For drier air, press the button and set to a lower
percent value(%).
For damper air, press the button and set a higher
percent value(%).
Press to initiate the Auto start and Auto stop
feature, in conjuction with the and buttons.
—
+
Timer
Timer button
Press to initiate the Auto start and Auto stop feature,
in conjuction with the and buttons.
When the unit is on, first press the Timer button,
the Timer Off indicator light illuminates. It indicates
the Auto Stop program is initiated. Press it again
the Time On indecator light illuminates.It indicates
the Auto Start is initiated.
When the unit is off, first press the Timer button,
the TIMER ON indicator light illuminates. It indicates
the Auto Start program is initiated. Press it again
the Time Off indecator light illuminates.It indicates
the Auto Stop is initiated.
Press or hold the UP or DOWN button to change the
Auto time by 0.5 hour increments, up to 10 hours,
then at 1 hour increments up to 24 hours. The control
will count down the time remaining until start.
The selected time will register in 5 seconds and the
system will automatically revert back to display the
previous humidity setting.
When the Auto start & Auto stop times are set, within
the same program sequence, TIMER ON OFF
indicator lights illuminate identifying both ON and OFF
times are now programmed.
Turning the unit ON or OFF at any time or adjusting
the timer setting to 0.0 will cancel the Auto Start/Stop
function.
When LED display window displays the code of P2,
the Auto Start/Stop function will also be cancelled.