Application Guide

LIT0003P 0219 ©2019 Phillips & Temro Industries
COOLANT DAM
®
PRESSURE TESTER
COOLANT DAM
®
ADAPTERS & PLUGS
T–1020
Volvo. Fits vehicles using Volvo
part number 1542591 radiator
cap. (46x33mm Thread).
T–1029
GMC – Freightliner – Western
Star Threaded, Non-Vented,
Western Star cap part number
20009-0002.
T-1030
Transit Bus Adapter.
Fits many Flexible, Crown,
MCI, New Flyer, GM, MAN,
SAAB filler necks.
T–1034
Pop Off Pressure Adapter.
Mounts to top of Coolant Dam
®
to test pop off pressure
of truck ”B” size cap.
T–1040
Volvo. Fits vehicles using
Volvo part number 6794968
radiator cap. (63 x 3mm Thread).
T–1223
Volvo VN Series. Fits vehicles
using Volvo part number
1674922.
T–1228
Ford E-350. International 7.3L.
Fits vehicles using Cap #
RS-103, F6DZ-8100A, 12R-16#,
or 31406.
T–1229
Kenworth Vehicles using
cap #N5349001.
T–1230
Volvo VN Series. 2006 and newer
Fits vehicles using Volvo part
number 20519046.
T–1233
Freightliner Columbia/Cascadia.
2008 & newer Vehicles using
cap # N9685001 or BHTN9685001
or BHTW3678001*.
T–3000
Navistar (1996 & Newer).
Fits vehicles using Navistar
part number 2039390C1
radiator cap.
T–3064
Freightliner Columbia Fits
vehicles using Freightliner
part number 05-20763-000
radiator cap.
T–3030X
Caterpillar Adapter. Call for
information – Cat. #s 7N918,
7N5565, 6N1981, 1N3599.
A-440 – 3/8" A-444 – 5/8" A-448 – 7/8" A-449 Kit (1) ea
3/8" to 7/8"
A-441 – 7/16" A-445 – 11/16" A-451 – 1"
A-442 – 1/2" A-446 – 3/4" A-452 – 1-1/8" A-467 – Case
A-443 – 9/16" A-447 – 13/16" A-453 – 1-1/4" A-466 – Foam Insert
Rubber Expansion Plugs – Used to
temporarily plug coolant lines during
component replacement
T–1024
Truck ”B” Size
FOR SERVICING CUMMINS ISX AFTER-TREATMENT INJECTOR (ATI) UNITS
KT-T1000-CUMMINS-ISX-ATI
Kit includes:
• 3089567 Coolant Block Plug
• 4918690 Coolant Line Plugs
• A-6622 36" Extension Hose
• B-702 Work Instruction Sheet
Using the Coolant Dam
®
in servicing the
ATI is a labor and shop time saving tool.
The coolant will not have to be drained
and refilled as is happening now when
the Coolant Dam
®
is not used. Arctic Fox
recommends that after complete service
of the ATI, that you follow the Cummins ISX
engine procedures for purging air from the
coolant system before putting the
engine under load.
T–12027
To be used with T–1025 to test
32mm I.D. 16mm deep cooling
system filler necks.
T–1025
Standard Automotive Size.
Reversible seal fits 1" or 3/4"
deep filler necks. Also fits
late model Mercedes 1319.
T-1721
Carrier Vector Series
3 threads at .45" depth