Application Guide

COOLANT DAM
®
PRESSURE TESTER
BENEFITS
• No need to drain the block
for simple repairs
• Pressure testing without
hand pumping or running
the engine
WHEN TO USE
• Changing Heater Hoses
• Changing Fan Sensors
• Changing Temperature
Sensors
• Installing Shut-off Valves
for Fuel Warmers &
Separators
• Replacing Cab Heater Cores
• Replacing Heater Control
Valves
T-1000 KIT INCLUDES
• T-1025 Adapter
• A-462-2 Extension Hose
• A-536 Discharge Hose
• A-483 Hanger
• Storage Case
MODEL
T-1000
HERE’S HOW IT WORKS
Using shop air, this ingenious, simple,
new time-saving tool holds engine
coolant inside the engine, with little or
no coolant loss, even when pipe plugs,
sensors, valves and other components
are removed for replacement or repair.
• Coolant Dam
®
Pressure Tester
creates a vacuum, holding coolant
inside the engine.
• The unit quickly converts from
vacuum to a pressure tester, up to
the maximum pressure limit of the
included pressure cap.
Air Requirements for Continuous
Operation: 30 CFM at 120-150 PSI
(.85 Cubic Meters at 8-10 Bar)
Simple tool that holds
coolant inside the engine
when other components
are removed for repair or
replacement.
®
®