OPERATOR'S MANUAL

39
Division II - Operation/
Maintenance
Previous Main TOC Section TOC Next
ATV Operation
ATV-0034
ATV-0035
ATV-0036
ATV-0037
1. Stop where you are, apply the brakes,
and shift to neutral.
2. Shut off the engine.
3. Keep your body weight shifted for-
ward.
4. Ask the passenger to dismount.
5. Get off the ATV on the uphill side.
6. If you’re to the left of the ATV, turn
the handlebar all the way left.
7. Partially release the brake, but lightly
hold the brake lever.
8. Let the ATV roll to your right side
until it faces slightly downhill.
9. Reapply the brakes.
10. Get back on the ATV from the uphill
side, have your passenger mount the
ATV from the uphill side, and keep
your body weight and the passenger’s
body weight shifted uphill when you
sit down.
11. Start the engine and follow the
method for riding downhill.
Riding Uphill
Many accidents happen while riding on
hills and as a result of the ATV rolling or
flipping. So, obviously, use extreme caution
and follow this method for riding uphill.
ATV- 20 7
1. Accelerate before you start climbing;
then maintain a steady pace.
2. Both the operator and the passenger
should lean as far forward as possible.
For steeper hills, the operator should
come off the seat to stand and lean
forward.
3. If you lose speed, release the throttle
(so your front tires don’t lift),
OR
2012 700 Diesel