OPERATOR'S MANUAL

DIVISION II - OPERATION/
MAINTENANCE
31
Previous Main Table of Contents Section Table of Contents Next
ATV Operation
K-Turns
Use K-turns if you accidentally stall while riding uphill; you need to
take action before the ATV rolls backward down the hill.
1. Stop where you are, apply the brakes.
2. Shut off the engine.
3. Keep your body weight shifted forward.
4. Get off the ATV on the uphill side.
5. If you’re to the left of the ATV, turn the handlebar all the way
left.
6. Partially release the brake, but lightly hold the brake lever.
7. Let the ATV roll to your right side until it faces slightly down-
hill.
8. Reapply the brakes.
9. Get back on the ATV from the uphill side, and keep your weight
shifted uphill when you sit down.
10. Start the engine and follow the method for riding downhill.
Riding Uphill
Roughly 20% of accidents happen while riding on hills and as a result
of the ATV rolling or flipping. So, obviously, use extreme caution and
follow this method for riding uphill.
1. Accelerate before you start climbing; then maintain a steady
pace.
2. Lean as far forward as possible. For steeper hills, come off your
seat to stand and lean forward.
3. If you lose speed, quickly release the throttle (so your front tires
don’t lift), OR
ATV-0013 ATV-0024 ATV-0025
ATV-0020 ATV-0034
ATV-0035 ATV-0036
ATV-0037
ATV-0019 ATV-0032 ATV-0033
2012 Y-12