How to Attach Cover Springs

Begin with a strap, a

buckle, and a standard

spring. The buckle

should sit with the

ridges facing up.

Insert the strap, from

the bottom, into the

first section of the

buckle.

Weave the strap into

the middle section of

the buckle.

Slide on the triangle

end of the spring.

Make sure the hooks of

the spring are facing

up, so they don’t scrap

on the concrete.

Weave the strap back

through the middle

section.

Weave the strap

through the last

section.

Pull tight! Make

adjustments to the

strap as needed.

PAGE 1
Begin with a strap, a buckle, and a standard spring. The buckle should sit with the ridges facing up. Insert the strap, from the bottom, into the first section of the buckle. Weave the strap into the middle section of the buckle. Weave the strap back through the middle section. Weave the strap through the last section. Pull tight! Make adjustments to the strap as needed. Slide on the triangle end of the spring. Make sure the hooks of the spring are facing up, so they don’t scrap on the concrete.