User Guide

Soft Edge Slider - gives cropped edges a warm fade based
on the position of the slider.
Apply To All Layers - crops all layers to the selected area when checked.
Crop – crops the image to only show areas that have been selected.
Width – displays the current image's width in pixels. You can change
this to any desired value to resize the image.
WScale – displays the image width as a percentage, with "100" being
the current actual image width. You can change this to any desired
value to resize the image. For example, if you changed it to "50," the
new image width would be half the size of the original.
Height – displays the current image's height in pixels. You can change
this to any desired value to resize the image.
Hscale – displays the image height as a percentage, with "100" being
the current actual image height. By changing this, you can change the
height of the image. For example, if you changed it to "200," the new
image height would be twice the size of the original.
Keep Aspect Ratio – retains the original image proportions when you
change either the width or the height. For example, when this box is
checked and you change the pixel width of the image, the program will
automatically adjust the pixel height to maintain proper image propor-
tion (otherwise you'd get a distorted image). You'll almost always want
this box checked.
Resize – finalizes any resizing that you’ve done.
ArcSoft PhotoImpression Quick Start Guide
13