Instruction manual
8
Section 2
Getting Started
Loading the Battery
Before using the camera, users must load Lithium-ion
rechargeable battery
Insert the battery following to the correct polarity marks 1.
( + or -).
&ORVHWKHEDWWHU\FRYHU¿UPO\2.
Charging the Battery
You must use the supplied AC charger
or USB cable.
Camera must be turned OFF; blinking
OLJKWFRQ¿UPVFKDUJLQJEXWOLJKWLV
constant when charging
has been completed.
Inserting and Removing an SD Card (Optional)
The camera comes with internal memory which allows you to store
pictures and movies. You can
expand the memory capacity by using an optional SD/SDHC
memory card.
Insert the memory card into the right position. Please refer to 1.
WKH¿JXUH
To remove an installed SD card, press the card inwards to release it.2.
When the card pops out, gently remove it from its slot.3.
Recommended memory capacity: 1GB above.4.
Note
:KHQ D PHPRU\ FDUG LV ¿WWHG PRYLHVSLFWXUHV DUH
saved on card rather than on the built-in memory.
Protecting Data on an SD Card: SD card is read-only
by locking the SD card. No pictures and movies can
be recorded when the SD card is locked. Make sure
the lock is on writeable position before recording any
media.
Writeable
position
Write-Protected
Position