® USER INSTRUCTION MANUAL Auto-Darkening Filters Personal Protection X54Di X54V X81VX TEL: X60VX iDF81 85 Independence Drive, Taunton, MA 02780 (508) 884-9600 • TOLL FREE: (800) 223-4685 • ADFILTERS-03-UI Rev B FAx: (508) 884-9666
ARCONE® auto-darkening filters protect your eyes against harmful ultra-violet and infrared rays, both in the dark and light state. No matter what shade the filter is set to, the filter will provide UV/IR protection. When used properly, the filter will prevent your eyes from being burned due to optical radiation. User’s eyes can be severely burned if welding with a damaged lens (cracked, pitted, etc.).
Grind Mode x54Di: Press and hold Sensitivity button until the Grind LED flashes. Press again (do not hold) to turn off. x54V, x60Vx, and x81Vx: Press the “M” Mode button until “Sensitivity” flashes and decrease it using the “-” button until the LCD readout indicates “Grind”. iDF81: Turn sensitivity knob counter-clockwise until it clicks and the LCD readout displays “Grind”. (***NOTE: Other modes will not work when in Grind Mode).
Care and Maintenance your new filter requires virtually no maintenance other than periodic cleaning when the lens becomes dirty or clouded from smoke. ARCONE® auto-darkening filters are water-resistant and may be cleaned by using a soft cloth with soapy water solution, or standard window cleaner. Welding helmet may be cleaned with soft cloth and soapy water, also. By changing cover plates frequently you will extend the life of your filter and guarantee the best operation possible.
