User manual

ZyWAN User Manual Safety and regulatory information
© 2007 Eurotech Ltd Issue B 7
1 Reorient or relocate the receiving antenna.
2 Increase the separation between the equipment and receiver.
3 Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4 Consult the dealer or an experienced radio/TV technician for help.
Radio frequency standards for ZyWAN-GPRS
FCC ID: UFNZEUSGR64
FCC grant information: This device is approved for mobile RF exposure conditions.
Approved for use with antenna(s) as listed in this filing. The antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
Radio frequency standards for ZyWAN-IDEN
FCC ID: UFNZEUSIO270
FCC grant information: Products operating with this OEM module must not exceed
2.54 W EIRP total system output with antenna gain not exceeding 7.3 dBi. The
antenna must operate at 20 cm or more from persons. This module is not approved for
use in any products operating as a portable transmitter with respect to 2.1093 or other
mobile operating conditions that do not meet categorical exclusion requirements of
2.1091, which requires separate approval.
Radio frequency standards for ZyWAN-EVDO
FCC ID: UFNZEUSMC5725
FCC grant information: Modular Approval for use as a module in mobile-only exposure
conditions, antenna gain including cable loss must not exceed 5.1 dBi in cellular band
and 4.15 dBi in PCS band, for purposes of 2.1043 and 2.1091. The antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm
from all persons. The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter within a host device.
Radio frequency standards for ZyWAN with PN18 802.11
FCC ID: UFNZEUSPN18
FCC grant information: Modular Approval for mobile RF exposure conditions, the
antenna(s) used for this transmitter must be installed to provide a separation distance
of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. The only antennas approved for use
with this module are those documented in the filings under this FCC ID.