User manual

ZyWAN User Manual Configuring the ZyWAN
© 2007 Eurotech Ltd Issue B 38
Button Explanation
Set IOTA Provision
After one or both NAM profiles have been activated, select
the button for NAM 0 or NAM 1, then click the Set IOTA
Provision button. This provisions the profile by connecting to
the cellular network using this account.
The provisioning process requires an active cellular
connection to the service provider, and may not be
done in a roaming area. Make sure a cellular antenna
is connected to the ZyWAN and that the ZyWAN is
located in an area where EvDO/CDMA service for the
service provider is available.
Status information is displayed below in the large area. This
may take several minutes for a response, possibly up to six
minutes. The following message is displayed:
Waiting for reply (this may take a few minutes to
complete) …
The normal response from this action should look something
like the following, and end with the sentence, IOTA session
completed successfully! Scroll to the bottom of the received
text response to validate that this message is given. The
message looks like this:
<mmc mmcID=”126”
status-uri=””>
<method
id=”1”
name=”disconnect”
reportstatus=”false”
</mmc>
140> MMC session disconnected, session id=”126”
140> Resetting IOTA session, end status=0
140> HTTP: Shutdown
140> SSL session fff7f4 closed with status 0
140> SSL session fff7f4 deleted
141> Socket 275 closed
142> PPP closed
142> Netlib closed (app_id=101)
142> MIP Profile 1 was provisioned – Set active MIP
profile to 1
142> IOTA session completed successfully! Client
initiated=1
OK
If this success message is not displayed here, another
attempt may be made to provision the account. If necessary,
the entire response text from the text area can be copied and
pasted, in order to request troubleshooting assistance from
the service provider.
Clear Status Area
Clicking the Clear Status Area button clears any previous
status information in the text area.