User manual

ZyWAN User Manual Configuring the ZyWAN
© 2007 Eurotech Ltd Issue B 37
The following buttons are available:
Button Explanation
Get NAM Profiles
Clicking this button reads from the module any existing
account profiles in the modem. This reads the MDN, MSID,
System ID and Network ID, and fill the NAM 0 and NAM 1
entries on the Web page with this data. Otherwise, these
values (supplied by the network provider) may also be
entered by hand into those fields.
The normal response from this action should begin with HTTP
Reply Status - 200 and contain additional lines with the MDN
and other profile information as follows:
HTTP Reply Status – 200
<NAM-0>
MDN: 9135299437
MDN: 9852534784
SID: 0
NID: 65535
OK
</NAM-0>
<NAM-1>
MDN: 8585551515
MDN: 0000006951
SID: 0
NID: 65535
OK
</NAM-1>
If the word ERROR is displayed here, another attempt may
be made to request the NAM profiles.
Set NAM Profile
This button activates a profile. After the Master Subsidy Lock
and all the data for the modem profile are entered, click the
Set NAM Profile button to activate the profile. After a few
seconds, status information is displayed below in the large
text area.
The normal response from this action should begin with HTTP
Reply Status - 200 and end with NAM Profile is set. Please
allow a few seconds for the modem to reset as follows:
HTTP Reply Status – 200
at~namlck=468691
OK
at~namval=0,9135299437,9852534784,0,65535
OK
at!reset
OK
NAM Profile is set. Please allow a few seconds for the
modem to reset.
Wait at least 5-10 seconds before moving on to the next step.
If the word ERROR is displayed here, another attempt may
be made to set the NAM profile.