User manual

ZyWAN User Manual Configuring the ZyWAN
© 2007 Eurotech Ltd Issue B 29
Configuring the ZyWAN
Configuration of the ZyWAN is done using a Web browser, either Internet Explorer,
Mozilla Firefox or Opera. Other Web browsers have not been tested and may not be
fully compatible with the ZyWAN configuration Web page.
Log into Web page
Make sure the ZyWAN is connected to the network.
To log into a web page:
1 Enter the appropriate address preceded by ‘http://’. If the ZyWAN has never been
configured, see
Initial configuration with a single PC on page 19 or Initial
configuration over a network
on page 23. For instance, typically the default Web
address on Ethernet port 0 is http://192.168.1.1.
If the ZyWAN has been previously configured for a different network configuration,
its numeric address should be used instead. The Web configuration page may be
accessed via any available network (cellular, WiFi, Ethernet), unless Web access
for that network interface has been disabled.
2 Enter your log in details when prompted. The default username is
Arcom and default
password is
Arcom: