Service manual

Table of Contents
SM-1H1.0002, Rev. 1, July 2009 iii
Table of Contents
1. GENERAL INFORMATION...............................................................................................................1-1
1.1. Safety and Regulatory Information...........................................................................................1-1
1.2. FCC Part 15 Compliance.........................................................................................................1-1
2. INTRODUCTION................................................................................................................................2-1
2.1. TransPortal Interlock Monitor....................................................................................................2-1
2.2. Feature Overview .....................................................................................................................2-2
2.2.1. Top Panel Features ......................................................................................................2-2
2.2.2. Front Panel Features ....................................................................................................2-2
2.3. Electrical and Mechanical Specifications..................................................................................2-3
2.4. Operating Overview..................................................................................................................2-3
2.5. Front Panel Inputs, Outputs, and Controls ...............................................................................2-4
2.5.1. ETH0 and ETH1 ...........................................................................................................2-4
2.5.2. USB Port.......................................................................................................................2-4
2.5.3. Serial Ports 1 and 2 ......................................................................................................2-4
2.5.4. Power Input...................................................................................................................2-5
2.6. Top Panel Keypad/Displays......................................................................................................2-5
2.6.1. Top Panel Keypad ........................................................................................................2-5
2.6.2. Top Panel Indicators.....................................................................................................2-5
2.6.2.1. Operational State ...........................................................................................2-5
2.6.2.2. Alarm Conditions............................................................................................2-5
2.6.2.3. Communication Status...................................................................................2-5
2.6.2.4. System Status................................................................................................2-6
3. INSTALLATION AND SETUP...........................................................................................................3-1
3.1. Needed for Installation..............................................................................................................3-1
3.2. Unpacking and Inspecting the Unit...........................................................................................3-1
3.3. Physical Mounting.....................................................................................................................3-2
3.4. Connecting Field Wiring............................................................................................................3-2
3.5. Verifying Installation..................................................................................................................3-4
3.5.1. Initialization ...................................................................................................................3-4
3.5.2. Operation ......................................................................................................................3-4
4. CONFIGURING THE TRANSPORTAL INTERLOCK MONITOR.....................................................4-1
4.1. Configuring the MICROLOK II for Use with the TransPortal Interlock Monitor ............................4-1
4.2. Configuring the TransPortal Interlock Monitor Operating Parameters .....................................4-2
4.2.1. Locally Accessing the Embedded Web Server.............................................................4-2
4.2.2. Navigating the Embedded Web Server ........................................................................4-3
4.2.2.1. Ethernet Tab ..................................................................................................4-4
4.2.2.2. Networking Tab..............................................................................................4-6
4.2.2.3. Terminal Servers Tab.....................................................................................4-9
4.2.2.4. Status Tab....................................................................................................4-12
4.2.2.5. Update Tab ..................................................................................................4-13
4.2.2.6. Security Tab .................................................................................................4-13