Service manual

Configuring the Transportal Interlock Monitor
SM-1H1.0002, Rev. 1, July 2009 4-15
Figure 4-10. Typical mlevents.txt File
4.3.2. Transferring the mlevents.txt File to the TransPortal Interface Monitor
The mlevents.txt file can be transferred to the TIM using either a Windows computer or a Linux
computer.
4.3.2.1. Using a Windows-Based Computer
For a windows-based computer, the simplest way to transfer the file to the TIM by using
WinSCP (a free program available at http://winscp.net) as follows.
1. From a computer on the same network as the TIM, install WinSCP (if required).
2. Run WinSCP and select create a new connection using the settings listed below.
See Figure 4-11 for typical login screen.
• Host Name: IP address of the TIM on the network
• Port Number: 22
• User Name: root
• Password: arcom
• Private Key File: (leave blank)
• File Protocol: SFTP
• Allow SCP Fallback: Yes