Service manual

Configuring the Transportal Interlock Monitor
SM-1H1.0002, Rev. 1, July 2009 4-3
4.2.2. Navigating the Embedded Web Server
The embedded web server has a number of navigational tabs along the top of the home page.
Each tab takes you to a different web page, providing convenient local access to configure the
behavior of the TIM. On initial access, the Status configuration tab (See Section 4.2.2.4.) is
shown by default.
• Cellular Not used in this TIM application
• Ethernet Configure Ethernet ports ETH0 and ETH1 (See Section 4.2.2.1)
• Wifi Not used in this TIM application
• Networking Open and configure communication ports (See Section
4.2.2.2)
• GPS Not used in this TIM application
• Terminal Clients Not used in this application
• Terminal Servers Enable and configure terminal servers (See Section
4.2.2.3)
• Status View software revision and hardware configuration data
(See Section 4.2.2.4)
• Update Update the TIM URL (See Section 4.2.2.5)
• Security Change web password for TIM access (See Section 4.2.2.6)
A description of each active web page used in this TIM application and how to view or configure
the page follows.