User manual

ZyWAN User Manual Configuring the ZyWAN
© 2008 Arcom Issue D 87
Terminal Servers
The Terminal Servers tab looks like this:
The various items must be configured in order to set up Terminal Server services. The
Terminal Server sets up a listening port for inbound TCP/IP connection, allowing
communication directly to a local serial port.
After setting all the Terminal Server properties, click the Submit New Configuration
button before switching to a new tab or closing the window.
Changes made to the Terminal Server page take effect immediately after
submitting changes, without requiring a reboot.
Enable Terminal Servers
To allow one or more Terminal Server services to be configured, set Enable Terminal
Servers to Yes. This makes the following items available in the Table of Terminal Servers:
The following buttons are available:
Button Explanation
Insert Row#
Each of the Terminal Servers exists as a large set of properties
in a numbered table row. In order to insert a row in the table,
enter a number in the box between 1 and one greater than the
highest number of rows. Then click the Insert Row# button to
insert a blank row. This row must be filled in with all data
required.
Delete Row#
In order to delete a Terminal Server configuration (a row in the
table), enter a number in the box between 1 and the highest
number of rows. Then click the Delete Row# button to delete
the row. Once a row is deleted, it cannot be restored without
inserting a row and entering the data again.