User manual

ZyWAN User Manual Configuring the ZyWAN

If Enable Port Forwarding is set to Yes, the Networking tab looks like this:

Changes made to the Open Ports, Port Forwarding and NAT portions of

the Networking page take effect immediately after submitting changes,

without requiring a reboot.

The following buttons are available:

Button Explanation

Insert Row#

Each of the table rows is numbered. In order to insert a

row in the table, enter a number in the box between 1 and

one greater than the highest number of rows. Then click

the Insert Row# button to insert a blank row. This row

needs to be filled in with all data required.

Delete Row#

In order to delete a row in the table, enter a number in the

box between 1 and the highest number of rows. Then

click the Delete Row# button to delete the row. Once a

row is deleted, it cannot be restored without inserting a

row and entering the data again.

The screen offers the following fields:

Field Explanation

Inbound Interface

Enter the name of the network interface on which to

monitor the incoming connection to an IP port, such as

eth0 or ppp0. See Understanding Interfaces on page 23

for a description of the available interfaces on the ZyWAN.